You are a big fan of DIY projects, so why not try something for your very best friend, your pet dog?
Quality dog accessories are expensive, and you already may have stretched the pet-stuff budget getting home quite a few of the goodies you saw at the store.
Dog leashes are one of your favorite buys, and would you not love to have some lovely leads to make evening walks with your dog easier?
Dog collars and leads are some of the simplest-to-make items for your dog, and just as essential if you have an energetic pooch who takes you for a walk rather than the other way round.
In this post we look at how you can create your own dog leads and restraints (using eco-friendly material) and give them a personalized touch.
Eco-Friendly Dyed Dog Lead
Colorful rope leashes are quite popular. They are strong and sturdy, durable and pretty to look at as well. So why not make one for your pooch instead of shopping online for one?
You can choose the color of your choice and get started. You will need a quality rope about 3 yards long and 3/8 inch thick. Go for eco-friendly recycled nylon climbing rope. There are also several companies that make ropes from donated stuff and recycled materials, so you can rest assured you will find an apt choice.
In addition to the rope you will need a natural and organic fabric dye that is safe for your pooch as well as the environment. Choose a color of choice, but if it is a dark shade like orange or black, you can dye your lead to get a perfect gradient or a dip-dyed effect.
You also need 2 rubber clamps and a snap hook. You can look for green options while purchasing these as well.
Now let’s see how you can go about making that stylish dog leash.
Step #1: Determine the Length of the Lead
- Six feet is the standard length of dog leashes and a safe measure to go with. Measure the rope and cut it as per the length you need. Tape, melt or tie the ends so that the rope does not unravel.
Step #2: Prepare the Rope for Dyeing
- Soak the rope in warm water for some time. This helps the rope absorb the dye better.
- Prepare the dye as per the instructions given on the pack. You require very less quantity for this project, so use accordingly and avoid wastage.
Step #3: Dip and Dye Away!
- Dip the whole rope in the dye and take it out immediately. You can divide the rope into three parts and get each portion dyed to a different degree.
- Dip the portion you want to be dyed deep for a longer period in the dye. The other two portions can be dipped for different time periods according to the gradation you want.
- For best results use eco-friendly dyes.
Step #4: Let the Colors Set on the Rope
- Remove the rope and let it line-dry for some time. The purpose of this step is not to dry the leash but to let the dye hold fast.
- Putting the darker end at the top allows the dye to creep down to give a lovely gradient effect to your leash.
Step #5: Rinse Thoroughly
- The next step is to rinse the rope thoroughly in cold water, until the water runs clear. You can use a recommended fixative to help seal the colors.
- Dye fixatives are a bit opaque when it comes to the eco-friendly part, so you can choose to forgo using them, until and unless you are sure they are certified green.
Step #6: Hook, Snap and Clamp- You Are Ready!
- This step comes after the rope has dried completely. It may take close to a full day for the rope to dry, so give it the necessary time to air out.
- Feed the chosen end of the rope through the snap hook and form a small loop. You can secure the free end with a pair of rubber clamps.
- Now, move to the other end of the rope where you need to form the loop that goes over the head of your dog. Form a suitably big loop, and secure the loose ends with the rubber clamps as before. (The rule of thumb is if your dog’s head measures 20 inches you need a loop that is 10 inches wider. So 20 inches + 10 inches= 30 inches wide)
- You can camouflage the rubber clamps with a cute DIY sleeve or covering made of a material of your choice. Yarn, twine or recycled leather covering will work fine. Google for ideas!
Reflective Dog Leash
- A reflective dog leash will help make both you as well as your dog visible to the traffic while out for a late-evening stroll.
- This is a really simple project and will help give a facelift to an old, but favorite leash. Leashes made from organic materials usually have an old and worn-out look, so you can use the reflective tape to jazz things up.
- You need a reflective fabric tape approximately 2 inches longer than the leash. There are eco-friendly reflective tapes available that are made from non-toxic materials and are bio-degradable. Some come with safe self-adhesives as well for extra convenience.
- While measuring for the length of the fabric tape required, you should also add in the hand loop of the leash. Cut out the fabric strip according to the measurements.
- Apply a thin layer of eco-friendly glue over one side of the leash. Press the reflective fabric tape onto the surface, smooth out as you go and hold it in place firmly.
- If there are excess fabric ends around the leash, trim them for a clean fit.
You can follow the same process for the collar also. If there are loops or buckles, you can thread in the reflective tape through them to cover the entire face of the collar.
There are plenty of DIY projects that you can try out to craft perfect accessories for your dog. The end products may not have the finish or the style of commercial products. But since you made them with all your love, they will have the personalized touch your pooch will definitely heart.
Written by: Nicola Reynor